By Daniel Shnader · Last updated: July 30, 2026

Toyota Key Fob Replacement — All Models

Shop UrbanX replacement Toyota key fobs for every model from 1998 to 2026, including Camry, Corolla, RAV4, Highlander, Tacoma, 4Runner, and Tundra. Our Toyota smart keys and transponder keys use the same FCC IDs as OEM dealer keys at a fraction of the price. A dealer charges $200-$400 for a Toyota key fob replacement — UrbanX key fobs start at $15.90 with free shipping and a 90-day return policy.

Key Takeaways

  • Toyota key fob replacements from $14.95 — dealers charge $200-$400+
  • Covers Camry, Corolla, RAV4, Highlander, Tacoma, Tundra, and all other models
  • H-Chip and G-Chip transponders pre-installed for immediate use
  • Most Toyota keys can be self-programmed with our included DIY instructions

Toyota Key Replacement

Shop replacement Toyota keys and key fobs for all models at UrbanX.

Browse Toyota Keys →

What we stock for Toyota

Our Toyota range currently runs to 1,142 listings, covering model years 2003 to 2026. By key type that breaks down as key fobs (713), transponders (428), smart keys (3), remote heads (1). Button configurations in stock: 6-button (12), 4-button (237), 3-button (377).

Toyota models we carry keys for

RAV4, Camry, Venza, Highlander, 4Runner, Tundra, Tacoma, Corolla, Avalon, Yaris, Prius, Sienna.

A model appearing in this list is not a guarantee that your particular year uses the same part. The identifiers below are the check that matters.

Most common Toyota FCC IDs in our catalogue

Sorted by frequency in our Toyota catalogue. Whichever code is printed on your current remote is the one that governs fitment, so find it before anything else.

FCC ID Listings
HYQ12BDM 111
HYQ14ACX 99
HYQ14AAB 93
HYQ12BDP 64
HYQ14FBA 61
HYQ12BBY 50
HYQ12BDC 50
HYQ12BEL 48

Most common Toyota OEM part numbers

Where an FCC ID narrows the field, the part number settles it. Look inside the fob shell or on the circuit board itself.

Part number Listings
89785-60160 226
89785-08020 225
89785-08040 185
89904-47230 81
89904-35010 81
89904-47370 81
89070-0R130 74
89070-42820 71

Counts reflect current stock and shift as the range changes. If your identifier is not listed, it does not necessarily mean we cannot supply it — search the identifier directly.

Getting the identifiers right

Two numbers decide whether a Toyota key will work, and the order matters. The FCC ID comes first: it is printed on the back of your existing remote or inside the battery compartment, and it tells you the radio frequency and transponder protocol your vehicle expects. The manufacturer part number comes second, moulded inside the housing, and it is the finer of the two filters.

A vehicle built close to a design changeover will not follow the year-based fitment charts. In those cases the identifiers on your own key override any lookup table.

Getting it working on your vehicle

Nothing arrives ready to use. A Toyota key has to be programmed to your specific vehicle, and any metal blade has to be cut. That is expected for aftermarket parts and is not a defect.

Some vehicles support an onboard sequence using two existing working keys, which avoids a call-out entirely. Where that is not available, a locksmith with diagnostic equipment is the usual route, with the dealer kept in reserve for the hardest cases.

A short pre-order check

  • Open the housing and note the OEM part number if one is present.
  • Confirm whether your vehicle uses a turn-key ignition or push-button start.
  • Count the buttons on your original, including boot release and panic.
  • Check the blade profile where the Toyota key has a metal blade.
  • Line up cutting and programming in advance so the car is off the road for less time.
  • Read the FCC ID from your existing remote and match it exactly.

    • Key guides by vehicle