By Daniel Shnader · Last updated: July 30, 2026

Jeep Key Fob Replacement — All Models

Find replacement Jeep key fobs for Wrangler, Grand Cherokee, Cherokee, Compass, Renegade and all models 1998-2026. UrbanX Jeep keys match OEM FCC IDs at a fraction of dealer cost.

What we stock for Jeep

Our Jeep range currently runs to 222 listings, covering model years 2005 to 2023. By key type that breaks down as key fobs (201), transponders (21). Button configurations in stock: 5-button (15), 4-button (77), 3-button (80).

Jeep models we carry keys for

Grand Cherokee, Renegade, Patriot, Wrangler, Compass, Commander, Liberty, Gladiator, Gladiator Wrangler, Wrangler Gladiator.

Coverage varies by year inside each of those ranges, and a model listed here does not mean every year of it takes the same key. Work from the identifiers below, not the model name.

Most common Jeep FCC IDs in our catalogue

The codes below cover the bulk of our Jeep range. Check the reverse of your existing fob, or lift the battery cover, and compare before choosing a listing.

FCC ID Listings
OHT692713AA 94
OHT692427AA 19
OHT1130261 16
2ADFTFI5AM433TX 15
KOBDT04A 14
M3N65981772 8
M3N5WY72XX 8

Most common Jeep OEM part numbers

The part number is the finer of the two checks, because a single FCC ID can span several part numbers built for different vehicles. Yours is usually moulded inside the housing or printed on the board.

Part number Listings
68039414 75
68033740AA 22
56040649AC 19
735636994 18
56046706 16
56046707 16
FI5-AM433TX 15
68039414AD 14

Counts reflect current stock and shift as the range changes. If your identifier is not listed, it does not necessarily mean we cannot supply it — search the identifier directly.

Identifying the right Jeep key

Start with the FCC ID on the remote you already hold. That code pins down the frequency and the chip protocol, which is what your car is actually listening for. Then look for the OEM part number inside the shell, because one FCC ID routinely covers several part numbers built for different vehicles.

Because changeovers happen mid-generation, the year on your registration is a starting point rather than an answer. The numbers on your existing key are the authority.

Why a new Jeep key will not work immediately

Expect two jobs on arrival: cutting the blade if there is one, and programming the electronics to your car. Neither is a sign of a faulty part — it is simply how replacement keys work.

Buying the part yourself and paying only for programming is normally well below a dealer-supplied key. Reserve the dealership for new vehicles, locked-down immobilisers, or a total key loss.

Before you order

  • Confirm whether your vehicle uses a turn-key ignition or push-button start.
  • Count the buttons on your original, including boot release and panic.
  • Check the blade profile where the Jeep key has a metal blade.
  • Line up cutting and programming in advance so the car is off the road for less time.
  • Read the FCC ID from your existing remote and match it exactly.
  • Open the housing and note the OEM part number if one is present.